Your Shopping cart is empty.

Skip to Main Content »

Elekit TU-8150 6V6, 6AQ5 DIY Kit

Elekit TU-8150 6V6, 6AQ5 DIY Kit

Be the first to review this product

Availability: In stock

Excl. Tax: €423.55 Incl. Tax: €512.50

Elekit TU-8150 6V6, 6AQ5 DIY Kit

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

* Required Fields

Excl. Tax: €423.55 Incl. Tax: €512.50

Details

COMPACT TUBE AMP WITH A HEADPHONE FEATURE

TU-8150, being a little brother of TU-8200, is taking over some attractive features from TU-8200 to enjoy difference in sound, such as:

  • 3 different connection modes: Ultra linear, Triode and Pentode. Selectable by a jumper plug
  • Different tubes for rolling: 6AQ5 and 6V6 series
  • Additional space for larger capacitors to give users upgrade options

The biggest point we believe is that the amp is designed not just for the stationary music players but also for portable audios. There is a preamplifier stage configured with an Opamp to resolve the problem of short of gain from a portable audio. The Opamp is mounted on an IC socket so that it can easily be exchanged with other commercially available Opamps. Each Opamp gives different taste in sound, so that users can take pleasure in searching a sound of their choice.

Also, portable audio lovers tend to use headphones/earphones, and as a matter of course, TU-8150 is equipped with a headphone jack. Moreover, the power to drive a headphone/earphone can be selected from 3 options by the combination of 2 resistors per channel. Users can select a combination most suitable for their own headphones/earphones.

We hope these exciting features will attract both old and new audiophiles around the world.

TECHNICAL SPECIFICATION

CIRCUIT CONFIGURATION A-Class Single, UL connection (switchable to Pentode and Triode), Auto-bias. 12AX7 1st stage + Preamplifier with NJM4580 OP-AMP before the volume. Output stage heater: AC power. Voltage amplifying stage: DC power. B-Power: MOSFET ripple filter.
STOCK TUBES JJ 6V6S x 2, ECC83 x 1
RATED OUTPUT Ultralinear: 2,9 W + 2,9 W
Pentode: 2,9 W + 2,9 W
Triode: 1,6 W + 1,6 W
8 Ω load on all cases
RATED INPUT 140 mV (INPUT-1), 410 mW (INPUT-2)
Ultralinear connection
RESIDUAL NOISE 75 µV RMS (IHF-A)
FREQUENCY RESPONSE 20 Hz - 50 kHz (-3 dB)
INPUT TERMINALS INPUT-1 (Front) 3-Pole mini jack (Priority)
INPUT-2 (Rear) RCA Jack
OUTPUT TERMINALS SP Output terminal (4-8 Ω), binding terminal (banana plug usable)
HP terminal (8-600 Ω) 6,3 mm standard jack (Not balanced)
SPEAKER IMPEDANCE 4-16 Ω (4-8 Ω recommended)
HEADPHONE IMPEDANCE 8-600 Ω (corresponds to high impedance HP's), unbalanced
POWER VOLTAGE 50/60 Hz, AC 115 V - 230 V (2-slot inlet)
POWER CONSUMPTION 28 W (no signal)
DIMENSIONS W 210 mm x H 122,5 mm x D 252 mm
(including projections)
WEIGHT Approx. 3,5 kg
Assembled, excl. power cord

You may also be interested in the following product(s)

Elekit TU-8500 pre amplifier DIY Kit

Elekit TU-8500 pre amplifier DIY Kit

Excl. Tax: €409.09 Incl. Tax: €495.00
     

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.